Hitachi Compute Blade 500 Series User Manual page 369

Message
Single-bit ECC errors were
detected during the previous boot
of the RAID controller. The DIMM
on the controller needs
replacement.
Contact technical support to
resolve this issue.
Press X to continue or else power
off the system and replace the
DIMM module and reboot. If you
have replaced the DIMM press X to
continue.
Single-bit overflow ECC errors
were detected during the previous
boot of the RAID controller.
The DIMM on the controller needs
replacement. Contact technical
support to resolve this issue.
If you continue, data corruption
can occur.
Press X to continue or else power
off the system and replace the
DIMM module and reboot.
If you have replaced the DIMM
press X to continue
Single-bit overflow ECC errors
were detected on the RAID
controller.
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
Description
The selection window appears.
c Press the Y key.
.
System startup continues.
Action 2:
a Press the C key, and then press the Enter
.
key.
b The LSI MegaRAID <HITACHI SAS 3004
.
iMR ROMB> Configuration Utility restarts.
Action 3:
If this message appeared, contact your reseller
or call maintenance personnel.
Cause:
An error occurred in the cache memory of the
disk array controller.
Action 1:
a Press the X key, and then press the Enter
.
key.
The following message appears: Critical
Message handling completed. Please exit.
b Press the ESC key.
.
The selection window appears.
c Press the Y key.
.
System startup continues.
Action 2:
If this message appeared, contact your reseller
or call maintenance personnel.
Cause:
An error occurred in the cache memory of the
disk array controller.
Action 1:
a Press the X key, and then press the Enter
.
key.
The following message appears: Critical
Message handling completed. Please exit.
b Press the ESC key.
.
The selection window appears.
c Press the Y key.
.
System startup continues.
Action 2:
If this message appeared, contact your reseller
or call maintenance personnel.
Cause:
An error occurred in the cache memory of the
disk array controller.
Action 1:
5-61