Key Operation For The Utility; Handling Error Messages At The System Boot; Procedure For Handling Error Messages - Hitachi Compute Blade 500 Series User Manual

Key operation for the utility

This section describes how to operate the LSI MegaRAID HITACHI SAS 3004
iMR ROMB Configuration Utility with the keyboard.
[↑], [↓], [←], [→]
[Enter], [Space]
[0] to [9]
[a] to [z]
[Esc]
Note: You can use only the keyboard to operate this utility.

Handling error messages at the system boot

Procedure for handling error messages

When a critical error, such as that the disk array controller does not work
properly and that the drive is not recognized, is detected at the system boot,
an error message appears like the following and you are prompted to enter a
key.
5-4
Key
Moves the cursor.
Selects an item that the cursor is placed on.
Determines an item setting.
Changes values.
Inputs a numeric value.
Inputs a alphabetical character.
Exits from the current menu.
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
Operation