ABB i-bus KNX Product Manual page 101

© 2009 Busch-Jaeger Elektro GmbH – A Company of the ABB Group
Example:
Parameters for "heating setpoint comfort" 21 °C are defined in the bottom
graph. With falling outside temperature the parameterised setpoint is
adjusted from an outside temperature of 10 °C from 21 °C to 25 °C.
The 25 °C is reached at an outside temperature of 0 °C. From there
the setpoint is no longer increased as the outside temperature continues
to fall.
Sollwert/°C
30
21
20
10
-10
Note:
CO is shown in the display when compensation is enabled.
Außentemperatur/°C
0 10 20
100