ABB i-bus KNX Product Manual page 36

ABB i-bus KNX
© 2009 Busch-Jaeger Elektro GmbH – A Company of the ABB Group
Commissioning
Minimum control value
Options: - 0%
- 5%
- 10 %
- 15 %
- 20 %
- 25 %
- 30 %
This parameter is required if the ambient temperature controller
with constant control regulates a continuous actuator or a fan coil.
To prevent switching with control variables that are too small, the parameter
"minimum control value" can be set to a value so that the actuator only
switches on at larger control values.
This parameter is only available if the "Cooling" or "Heat and cool" control
functions are used and the cooling control type is set to "Continuous" or
"FanCoil".
Maximum control value
Options: - 70%
- 75%
- 80 %
- 85 %
- 90 %
- 95 %
- 100 %
This parameter is required if the ambient temperature controller
with constant control regulates a continuous actuator or a fan coil.
To prevent switching with control values that are too high, the parameter
"maximum control value" can be set to a value so that the actuator switches
off at lower control values.
This parameter is only available if the "Cooling" or "Heat and cool" control
functions are used and the cooling control type is set to "Continuous" or
"FanCoil".
35