ABB i-bus KNX
© 2009 Busch-Jaeger Elektro GmbH – A Company of the ABB Group
Commissioning
Manual setpoint adjustment at reset of change from night / to night
Options:
- Yes
- No
If this parameter is set to "Yes", the setpoint offset is automatically reset
when switching operating modes from night and to night.
If a setpoint is adjusted manually, the increase or reduction of the setpoint
can be cancelled if the operating mode is changed, e.g. on receipt of
a telegram from a timer. This means that if the parameter is set to "Yes",
the manually adjusted setpoint will be rejected if the operating mode
changes and it will be reset to the setpoint preset in the parameter.
44