ABB i-bus KNX Product Manual page 59

Room thermostat fan coil with display

Hide thumbs Also See for i-bus KNX:

Table of Contents

ABB i-bus KNX

Commissioning

Threshold value stage 3

Options:

- 0%

- 10 %

- ...

- 70 %

- ...

- 100 %

Threshold value stage 3 specifies the magnitude of the control value

required to switch the ambient temperature controller from fan stage 2 to

fan stage 3. The threshold can be defined in percentages. Make sure that

the threshold for stage 3 is not set higher than the threshold for stage 3

(if available).

This parameter is only available if the "Heating" or "Heat and cool" control

functions are used, the heating control type is set to "FanCoil" and the

number of fan stages is min. "3 stage".

Table of Contents