Table of Contents
Advertisement
4. Using a Printer Server
5.
Confirm the settings, and then click [Device Name].
Configuration is now complete. Wait several before restarting Web Image Monitor.
6.
Click [Logout].
• To check the configuration is correct, enter the following from the command prompt:
F:> USERLIST
• If the printer works as configured, the name of the print server appears as a connected user.
• If you cannot identify the printer you want to configure, check the printer name against the
configuration page printed from the printer.
• If no printer names appear in the list, match the frame types of IPX/SPXs for the computer and printer.
4
Use the [Network] dialog box of Windows to change the frame type of the computer.
• For details about Web Image Monitor, see "Using Web Image Monitor".
• For details about login user names and passwords, see Security Reference, which is the administrator's
manual.
• p.139 "Using Web Image Monitor"
Setting Up as a Print Server (NetWare 4.x, 5/5.1, 6/6.5)
Follow the procedure below to connect the machine as a print server using NetWare 4.x, NetWare 5/5.1,
or NetWare 6 / 6.5.
• When using the printer as a print server in NetWare 4.x, NetWare 5/5.1, or NetWare 6/6.5, set
it to the NDS mode.
• When using NetWare 5/5.1 or NetWare 6/6.5, set the printer as a print server.
1.
Start Web Image Monitor.
2.
Click [Login].
A dialog box for entering the login user name and password appears.
3.
Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network administrator.
4.
Click [Configuration] in the left area, and then click [NetWare].
5.
Confirm the settings, and then click [Device Name].
Configuration is now complete. Wait several minutes before restarting Web Image Monitor.
6.
Click [Logout].
130
Advertisement
Table of Contents
