Table of Contents
Advertisement
• If you do not specify an interface, the Ethernet interface is selected automatically.
• If many types of interface are installed, configure the interface that communicates with linklocal
address.
• If you do not specify an interface, the Ethernet interface is automatically selected.
ether
Setting IPP-SSL printing
msh> bonjour ippport {ipp|ssl}
• If IPP-SSL Printing is set to ssl, the IPP port number will appear as 443, and IPP-SSL printing can
be performed with higher security.
• If IPP-SSL Printing is set to ipp, the IPP port number will appear as 631. Port 631 is the port for
normal IPP printing.
devicename
Use the "devicename" command to display and change the printer name.
View settings
msh> devicename
Printer name configuration
msh> devicename name "string"
• Enter a printer name using up to 31 alphanumeric characters.
• Set single names for each printer.
Printer name initialization
msh> devicename clear name
• Reset the printer name to its default.
dhcp
Use the "dhcp" command to configure DHCP settings.
View settings
The following command displays the current DHCP settings.
msh> dhcp
Interface
Remote Maintenance by telnet
Interface configured
Ethernet interface
5
181
Advertisement
Table of Contents
