Table of Contents
Advertisement
1. System Settings
Panel Key Sound
The beeper (key tone) sounds when a key is pressed.
The default setting is [Medium].
1
Warm-up Beeper (copier/Document Server)
You can have the beeper sound when the machine becomes ready to copy after leaving Energy Saver
mode, or when the power is turned on.
The default setting is [On].
If the Panel Tone setting is [Off], the beeper does not sound, whatever the Warm Up Notice setting.
Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or the number of copies
yet to be made (count down).
The default setting is [Up].
Function Priority
Specify the mode to be displayed immediately after the operation switch is turned on, or when System
Reset mode is turned on.
The default setting is [Copier].
Print Priority
Print Priority is given to the mode selected.
The default setting is [Display Mode].
Function Reset Timer
You can set the length of time the machine waits before changing modes when using the multi-access
function.
This is useful if you are making many copies and have to change settings for each copy. If you set a
longer reset period, you can prevent interruption from other functions.
The default setting is [Set Time].
When you select [Set Time], enter the time (3 - 30 seconds, in 1 second increments) using the number
keys.
The default setting for Function Reset Time is "3" second (s).
The Function Reset Timer setting is ignored if [Immediate] is set for Print Priority.
Interleave Print
You can set the timing for changing modes when "Print Priority" has been set to [Interleave].
The default setting is "10" sheet (s).
You can set the number from 1 to 20 sheets using the number keys.
Status Indicator
You can specify whether the status indicator shows the machine status or not.
20
Advertisement
Table of Contents
