Table of Contents
Advertisement
5. Monitoring and Configuring the Printer
Configuration
You can configure DHCP.
msh> dhcp "interface_name" {on|off}
• Click {on} to enable dhcp. Click {off} to disable DHCP.
• If the DNS server address and domain name are obtained from DHCP, be sure to click {on}.
ether
Current interface priority configuration display
msh> dhcp priority
DNS server address selection
5
msh> dhcp dnsaddr {dhcp|static}
• Specify whether to obtain the DNS server address from the DHCP server or use the address set
by a user.
• To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set
by a user, specify "static".
Domain name selection
msh> dhcp domainname {dhcp|static}
• Specify whether to obtain the domain name from the DNS server or use the domain name set
by a user.
• To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set
by a user, specify "static".
• p.356 "Using DHCP"
dhcp6
Use the "dhcp6"command to display or configure DHCPv6 settings.
View settings
The following command displays the current DHCPv6 settings.
msh> dhcp6
DHCPv6-lite configuration and display
msh> dhcp6 "interface_name" lite {on|off}
182
Interface name
Interface configured
Ethernet interface
Advertisement
Table of Contents
