Table of Contents
Advertisement
• Tray 4
This setting controls the duration of the airflow generated by the tray's fan. Press [+] or [-] to
increase or decrease the duration of the airflow.
• Max.: 10 second (s)
• Min.: 1 second (s)
• Step: 1 second (s)
The default setting is "1" second (s).
• Tray 5
This setting controls the duration of the airflow generated by the tray's fan. Press [+] or [-] to
increase or decrease the duration of the airflow.
• Max.: 10 second (s)
• Min.: 1 second (s)
• Step: 1 second (s)
The default setting is "1" second (s).
• Tray 6
This setting controls the duration of the airflow generated by the tray's fan. Press [+] or [-] to
increase or decrease the duration of the airflow.
• Max.: 10 second (s)
• Min.: 1 second (s)
• Step: 1 second (s)
The default setting is "1" second (s).
0116: Adjust Image Quality
Use this function to clean the drum and prevent white spots appearing on the printed image.
0118: Temperature / Humidity around the Machine
Use this function to display the air temperature or humidity in the vicinity of the machine. Report this
information if your service representative requests it.
• Temperature
• Humidity
0201: Adjust Staple Position / Finisher
Adjust the vertical position of stapling when using the optional finisher. Press [+] to move the position
forward (up), or [-] to move it backward (down).
• A3
• Max.: 2.0 mm
• Min.: -2.0 mm
Adjustment Settings for Operators
8
319
Advertisement
Table of Contents
