Table of Contents
Advertisement
View settings
msh> pathmtu
Configuration
msh> pathmtu {on|off}
• The default is "on".
• If the MTU size of the sent data is larger than the router's MTU, the router will declare it
impassable, and communication will fail. If this happens, selecting the "pathmtu" to "on" optimizes
the MTU size and prevents data output failure.
• Depending on the environment, information might not be obtained from the router, and
communication will fail. If this happens, select the "pathmtu" to "off".
prnlog
Use the "prnlog" command to obtain printer log information.
Print logs display
msh> prnlog
• Display previous print jobs.
msh> prnlog "ID Number"
• Specify the ID number of the displayed print log information to display additional details about
a print job.
• p.230 "Understanding the Displayed Information"
route
Use the "route" command to view and control the routing table.
Specified route information display
msh> route get "destination"
• Specify the IPv4 address to destination.
"0.0.0.0" cannot be specified as destination address.
Enabling/disabling specified IPv4 destination
msh> route active {host|net} "destination" {on|off}
• If you do not specify {host|net}, the host setting is automatically selected.
Adding IPv4 Routing Table
msh> route add {host|net} "destination" "gateway"
Remote Maintenance by telnet
5
193
Advertisement
Table of Contents
