Table of Contents
Advertisement
Separation Sheet Tray
You can specify and display the paper tray in which to set slip sheets. You can also specify the display
time.
• Display Time
You can select [At Mode Selected] or [Full Time].
Tray 1 (with the optional A3/11×17 Tray Unit)
Paper Size
You can select the size of the paper loaded in the optional A3/11×17 tray unit.
The paper size you can set for Tray 1 (with the optional A3/11×17 tray unit) is as follows:
11×17
The paper guide for the tray 1 is fixed. If you need to change the paper size, contact your service
representative.
Paper Type
You can set the display so you can see what type of paper is loaded in the paper tray.
The paper types you can set for Tray 1 (with the optional A3/11×17 tray unit) are as follows:
[Do not Display], [Recycled Paper], [Special Paper], [Color Paper 1], [Color Paper 2], [Yellow],
[Green], [Blue], [Purple], [Ivory], [Orange], [Pink], [Red], [Gray], [Letterhead], [Preprinted Paper],
[Bond Paper], [Cardstock], [Prepunched Paper]
Paper Thickness
The paper thicknesses you can set for Tray 1 (with the optional A3/11×17 tray unit) are as follows:
• Plain Paper
2
52 - 105 g/m
• Middle Thick
106 - 163 g/m
• Thick Paper 1
164 - 216 g/m
The default setting for "Paper Type" is Do not Display.
The default setting for "Paper Thickness" is Plain Paper.
The default setting for "Apply Duplex" is Yes.
The default setting for "Apply Auto Paper Select" is Yes.
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
For details about the relations between possible paper sizes and thickness, see "Recommended Paper
Sizes and Types", About This Machine.
(14 - 28 lb BOND)
2
(28 lb BOND - 90 lb INDEX)
2
(90 lb INDEX - 80 lb COVER)
Items of Tray Paper Settings
2
69
Advertisement
Table of Contents
