Table of Contents
Advertisement
NetWare Printing
• IPv6 cannot be used on this function.
Form feed
You should not configure form feed on NetWare. Form feed is controlled by the printer driver on Windows.
If NetWare form feed is configured, the printer might not work properly. If you want to change form feed
settings, always configure them using Windows.
• Under Windows 2000/XP and Windows Server 2003/2003 R2, clear the [Form feed] check box
on the [NetWare Settings] tab in the printer properties dialog box.
Banner page
You should not configure a banner page on NetWare. If you want to change the banner page setting,
always configure it using Windows.
• Under Windows 2000/XP and Windows Server 2003/2003 R2, clear the [Enable banner] check
box on the [NetWare Settings] tab in the printer properties dialog box.
Printing after resetting the machine
After resetting the remote printer, the connection from the print server will be cut off for about 30-40 seconds
before re-connecting. Depending on the NetWare specification, print jobs may be accepted, but they will
not be printed during this interval.
When using the machine as a remote printer, wait about two minutes after resetting before attempting to
print.
Precautions
8
363
Advertisement
Table of Contents
