Toshiba e-studio905 Operating Instructions Manual page 245

Hide thumbs Also See for e-studio905:
Table of Contents

Advertisement

Duplicate IP=<IP address> (from<MAC address>).
A conflicting IPv4 or IPv6 address was used. Each IPv4 or IPv6 address must be unique.
Check the device address in [MAC address].
DHCPv6 server not found.
The DHCPv6 server was not found. Make sure that the DHCPv6 is on the network.
Established SPX Connection with PServer, (RPSocket=<socket number>, connID=<connection
ID>)
Connection to the print server was established when the remote printer went online.
Frametype=<frametype name>
The specified frame type name <frame type name> is for NetWare use.
(IKE phase-1) mismatched authentication type: local=<authentication type 1>
remote=<authentication type 2>
This machine's <authentication type 1> in IKE phase 1 does not match the communicating host's
<authentication type 2>, Make sure this machine's ISAKMP SA authentication type matches that of the
communicating host.
(IKE phase-1) mismatched encryption type: <encryption algorithm 1> remote=<encryption
algorithm 2>
This machine's ISAKMP SA Oakley group <encryption algorithm 1> in IKE phase 1 does not match the
communicating host's ISAKMP SA Oakley group < encryption algorithm 2>, Make sure this machine's
ISAKMP SA Oakley group matches that of the communicating host.
(IKE phase-1) mismatched DH group: local=<DH group number 1> remote=<DH group number
2>
This machine's ISAKMP SA Oakley group <DH group number 1> in IKE phase 1 does not match the
communicating host's ISAKMP SA Oakley group <DH group number 2>, Make sure this machine's ISAKMP
SA Oakley group matches that of the communicating host.
(IKE phase-1) mismatched hash type: local=<Hash Algorithm 1> remote=<Hash Algorithm 2>
This machine's ISAKMP SA <Hash Algorithm 1> in IKE phase 1 does not match the communicating host's
ISAKMP SA <Hash Algorithm 2>, Make sure this machine's ISAKMP SA Hash Algorithm matches that of
the communicating host.
IKE [% s] is disable, set PSK text
The specified IKE entry is invalid. Enter the PSK text.
< Interface > started with IP: < IP address >
IP address (IPv4 or IPv6 address) has been set for the interface and is operating.
Message List
5
243

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio1105E-studio1355

Table of Contents