Toshiba e-studio905 Operating Instructions Manual page 349

• Step: 0.2 mm
The default setting is "0" mm.
1
• 8 / 11
2
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
• 12 18
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
• 8K
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
• B5 JIS
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
• Other Paper Sizes
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
0510: Adjust Gate Fold Position 1
Adjust the fold position (S1) of segment 1 of gate fold sheets when using the optional Multi-Folding
Unit.
The upper right illustration shows a partly opened, double parallel-folded sheet (folded in half), and
the lower right illustration shows a fully folded sheet. The
to the paper feed direction), and the
mark indicates the leading edge (relative
mark indicates the trailing edge.
Adjustment Settings for Operators
8
347