Locating The Transceiver (Find Device) - Philips IntelliVue TRx Instructions For Use Manual

To Initiate a Spot Check Measurement
Move the cursor over the SpO
.
Note—
failed measurement) when Spot Check is initiated at the Information Center.
To Initiate Standby
See instructions under "Standby Mode" on page 4-4.
Locating the
The Find Device feature enables you to generate an alternating pitch repeated
Transceiver
tone at the transceiver to assist in locating a missing device. This function is
(Find
initiated in the Telemetry Setup Window. Find Device requires that the
Device)
transceiver has good working batteries and is within the coverage area. The
device will not return from out-of-range until association with the Information
Center is re-established.
To locate a
transceiver
Draft - 1 Aug 08
There is no audio feedback at the transceiver (pulse tone or successful/
Step Action
From the Patient Window, select Telemetry Setup.
1
Select Find Device to generate a repeated tone at the transceiver.
2
Telemetry Functions at the Information Center & TeleMon
Telemetry Functions at the Information Center
label. Then click on the Spot Check icon.
2
9-3