Device
Revision
Pairing
Functionality
Pairing Networked Devices
Pairing at the
Information
Center
Draft - 1 Aug 08
The level of pairing functionality available is dependent on the software
revision of the devices in use. Refer to the following table to identify available
functionality.
Transceiver
Functionality
Rev.
Basic Pairing
A.00
Pairing via Direct
B.00
Connection
Enhanced Pairing
B.01
via Direct
Connection
Pairing via Short-
C.00
Range Radio
Connection
You can pair an IntelliVue Patient Monitor with the transceiver at the
Information Center. The telemetry data automatically displays as a permanent
overview session in the Telemetry Data Window on the IntelliVue Patient
Monitor. At the Information Center, the telemetry data and any patient
monitor data (e.g. NBP) are integrated in the patient sector.
See your IntelliVue Information Center Instructions for Use or IntelliVue
Patient Monitor Instructions for Use for information on how to pair/unpair
devices.
Pairing Networked Devices
Patient
Information
Monitor Rev.
Center Rev.
B.1
F.00
E.00
J.00
F.00
K.00
G.00
L.00
Pairing Monitoring Devices
10-3