Mitsubishi Electric F700 Instruction Manual page 190

Parameter
Parameters Register
Refer to the parameter list
41000 to
0 to 999
(page 38) for the parameter
41999
names.
Terminal 2 frequency
C2(902) 41902
setting bias (frequency)
Terminal 2 frequency
42092
setting bias (analog value)
C3(902)
Terminal 2 frequency
43902
setting bias (terminal
analog value)
Terminal 2 frequency
125(903) 41903
setting gain (frequency)
Terminal 2 frequency
42093
setting gain (analog value)
C4(903)
Terminal 2 frequency
43903
setting gain (terminal
analog value)
Terminal 4 frequency
C5(904) 41904
setting bias (frequency)
Terminal 4 frequency
42094
setting bias (analog value)
C6(904)
Terminal 4 frequency
43904
setting bias (terminal
analog value)
Terminal 4 frequency
126(905) 41905
setting gain (frequency)
Terminal 4 frequency
42095
setting gain (analog value)
C7(905)
Terminal 4 frequency
43905
setting gain (terminal
analog value)
Alarm history
Register Definition
40501 Alarm history 1
40502 Alarm history 2
40503 Alarm history 3
40504 Alarm history 4
40505 Alarm history 5
40506 Alarm history 6
40507 Alarm history 7
40508 Alarm history 8
Alarm code list
Data Description Data
H00 No alarm H52
H10 OC1 H60
H11 OC2 H70
H12 OC3 H80
H20 OV1 H81
H21 OV2 H90
H22 OV3 H91
H30 THT HA0
H31 THM HA1
H40 FIN HB0
H50 IPF HB1
H51 UVT HB2
Parameter Name Read/write
Read/write
Read/write
Read/write
Read
Read/write
Read/write
Read
Read/write
Read/write
Read
Read/write
Read/write
Read
Read/write
Read/write
Read
Read
Read
Read
Read
Read
Read
Description Data Description
ILF HB3 PE2
OLT HC0 CPU
BE HC1 CTE
GF HC2 P24
LF HC4 CDO
OHT HC5 IOH
PTC HC6 SER
OPT HC7 AIE
OP1 HF1 E.1
PE HF6 E.6
PUE HF7 E.7
RET HFD E.13
Communication operation and setting
Remarks
The parameter number + 41000 is the
register number.
The analog value (%) set to C3 (902) is read.
The analog value (%) of the voltage (current)
applied to the terminal 2 is read.
The analog value (%) set to C4 (903) is read.
The analog value (%) of the voltage (current)
applied to the terminal 2 is read.
The analog value (%) set to C6 (904) is read.
The analog value (%) of the current (voltage)
applied to the terminal 4 is read.
The analog value (%) set to C7 (905) is read.
The analog value (%) of the current (voltage)
applied to the terminal 4 is read.
Remarks
Being 2 bytes in length, the data is stored
as "H00 ". The error code can be
referrred to in the low-order 1 byte.
Performing write using the register 40501
batch-clears the alarm history. Set any
value as data.
3
183