Siemens SINAMICS G120 Operating Instructions Manual page 101

Low voltage converters built-in and wall mounting units with cu230p-2 control units

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Connections for frame sizes FSA ... FSC

Connections for frame sizes FSD ... FSF

You must remove the covers from the con‐

nections in order to connect the line supply,

braking resistor and motor to the inverter.

In addition, for frame sizes FSD and FSE,

release the two terminal screws on the con‐

nections for the motor and braking resistor,

and remove the dummy plug.

For frame size FSF you must breakout the

openings from the connection cover for the

power connections. Use side cutters or a

fine saw blade.

FSD, FSE: remove the lower covers

Converter with the CU230P-2 Control Units

Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE

4.4 Connecting the line supply and motor

The Power Modules are equipped with withdraw‐

able plug connectors that cannot be inadvertently

interchanged.

To remove a plug connector, you must release it

by pressing on the red lever.

Release lever

FSD ... FSF: remove the top covers

FSF: remove the lower covers

Show Quick Links

Table of Contents

Sinamics g120p