Factory Interface Settings - Siemens SINAMICS G120 Operating Instructions Manual

4.5.5

Factory interface settings

The factory setting of the interfaces depends on the Control Unit.
Control Units with PROFIBUS or PROFINET interface
The function of the fieldbus interface and digital inputs DI 0, DI 1 depends on DI 3.
--- No function.
DO x: p073x
Speed setpoint (main setpoint): p1070[0] = 2050[1]
Figure 4-30 Factory setting of the CU230P-2 DP and CU230P-2 PN Control Units
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
4.5 Connecting the interfaces for the inverter control
AO 0: p0771[0] DI x: r0722.x
Installing
113