Advanced Commissioning; Overview Of The Inverter Functions - Siemens SINAMICS G120 Operating Instructions Manual

Advanced commissioning

6.1

Overview of the inverter functions

Figure 6-1 Overview of inverter functions
Drive control
The inverter receives its commands from the higher-level control via the terminal strip or the
fieldbus interface of the Control Unit. The drive control defines how the inverter responds to
the commands.
The inverter can switch between different settings of the drive control.
The free function blocks permit configurable signal processing within the inverter.
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
Sequence control when switching the motor on and off (Page 195)
Adapt the default setting of the terminal strip (Page 197)
Controlling clockwise and counter-clockwise rotation via digital inputs (Page 210)
Drive control via PROFIBUS or PROFINET (Page 217)
Drive control via USS (Page 234)
Drive control via Modbus RTU (Page 237)
Drive control via Ethernet/IP (Page 240)
Drive control via BACnet MS/TP (Page 241)
Drive control via P1 (Page 244)
Jogging (Page 249)
Switching over the drive control (command data set) (Page 250)
Free function blocks (Page 252)
6
191