Siemens SINAMICS G120 Operating Instructions Manual page 472

Low voltage converters built-in and wall mounting units with cu230p-2 control units
Hide thumbs Also See for SINAMICS G120:
Table of Contents

Advertisement

Technical data
10.5 Technical data, PM330 Power Module
Article No.
Recommended cable cross-section for 500 V
- DC link infeed (2/3 inverter power)
Recommended cable cross-section for 690 V
- DC link infeed (2/3 inverter power)
Tightening torque for line, motor, DC link, and
ground cable
Dimensions: Width x height x depth [mm]
Weight
Minimum control cabinet size for installation of the
Power Module (width x height x depth)
The line supply must be capable of supplying the minimum short-circuit current so that the fuses trigger and consequential
1)
damage is avoided.
Note: If the minimum short-circuit current is not reached, then the tripping time for the fuses increases, and this may result
in consequential damage.
When semiconductor fuses are used, they must be mounted in the same higher construction as the inverter.
2)
Table 10-34 PM330, frame size HX, 3-phase 500 ... 690 VAC, Part 2
Article No.
Rated input current
- at 500 V, 45 °C
- at 600 V, 45 °C
- at 690 V, 45 °C
- at 500 V, 55 °C
- at 600 V, 55 °C
- at 690 V, 55 °C
Rated input current DCP/DCN
(for 2/3 of the inverter power)
- at 675 V
, 45 °C
DC
- at 810 V
, 45 °C
DC
- at 930 V
, 45 °C
DC
- at 675 V
, 55 °C
DC
- at 810 V
, 55 °C
DC
- at 930 V
, 55 °C
DC
Rated output current I
N
- at 500 V, 45 °C
- at 600 V, 45 °C
- at 690 V, 45 °C
- at 500 V, 55 °C
- at 600 V, 55 °C
- at 690 V, 55 °C
LO base load power
LO base load input current at 690 V
LO base load output current at 690 V
HO base load power
HO base load input current at 690 V
HO base load output current at 690 V
472
6SL3310-
1PG33-7AA0
2 x 95 mm
2 x 95 mm
50 Nm / 443 lbf in
548 x 1695 x 393
158 kg
6SL3310-
1PG35-2AA0
537 A
517 A
499 A
456 A
440 A
425 A
439 A
423 A
409 A
373 A
360 A
347 A
516 A
497 A
480 A
438 A
422 A
408 A
450 kW
489 A
470 A
400 kW
410 A
394 A
1PG34-0AA0
2 x 120 mm
2
2 x 120 mm
2
50 Nm / 443 lbf in
548 x 1695 x 393
158 kg
800 mm x 2000 mm x 600 mm
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
1PG34-5AA0
2 x 150 mm
2
2
2 x 150 mm
2
2
50 Nm / 443 lbf in
548 x 1695 x 393
162 kg

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinamics g120p

Table of Contents