Siemens SINAMICS G120 Operating Instructions Manual page 470

Technical data
10.5 Technical data, PM330 Power Module
Article No.
Required cooling air flow
Maximum connectable cross-section of the power
cable
Maximum connectable cross-section of the motor
cable
Maximum connectable cross-section of the DC link
cable
Recommended cable cross-section for 380 V/400 V
- line cable
- motor cable
3)
Recommended cable cross-section for 480 V
- line cable
- motor cable
3)
Recommended cable cross-section for 380 V/400 V
- DC link infeed (2/3 inverter power)
- Braking Module
4)
Recommended cable cross-section for 480 V
- DC link infeed (2/3 inverter power)
- Braking Module
4)
Tightening torque for line, motor, DC link, and
ground cable
Dimensions: Width x height x depth [mm]
Weight
The line supply must be capable of supplying the minimum short-circuit current so that the fuses trigger and consequential
1)
damage is avoided.
Note: If the minimum short-circuit current is not reached, then the tripping time for the fuses increases, and this may result
in consequential damage.
When semiconductor fuses are used, they must be mounted in the same higher construction as the inverter.
2)
The motor cables must be evenly distributed at both connection chambers.
3)
For connection of the Braking Module with rated power of 50 kW, P
4)
470
6SL3310- 1PE38-4AA0
450 l/s
6 x 240 mm
6 x 500 kcmil
4 x 240 mm
4 x 500 kcmil
4 x 240 mm
4 x 500 kcmil
4 x 185 mm
4 x 150 mm²
4 x 120 mm
4 x 120 mm²
4 x 120 mm
35 mm²
3 x 120 mm
35 mm²
50 Nm / 443 lbf in
801 x 1621 x 393
235 kg
1PE38-8AA0
450 l/s
6 x 240 mm
2
6 x 500 kcmil
8 x 240 mm
2
8 x 500 kcmil
4 x 240 mm
2
4 x 500 kcmil
4 x 185 mm
2
4 x 185 mm²
4 x 150 mm
2
4 x 150 mm²
4 x 150 mm
2
35 mm²
3 x 150 mm
2
35 mm²
50 Nm / 443 lbf in
801 x 1621 x 393
250 kg
power of 200 kW.
20
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
1PE41-0AA0
450 l/s
6 x 240 mm
2 2
6 x 500 kcmil
8 x 240 mm
2 2
8 x 500 kcmil
4 x 240 mm
2 2
4 x 500 kcmil
4 x 240 mm
2 2
4 x 240 mm²
4 x 185 mm
2 2
4 x 150 mm²
4 x 185 mm
2 2
35 mm²
3 x 185 mm
2 2
35 mm²
50 Nm / 443 lbf in
801 x 1621 x 393
250 kg