Siemens SIPROTEC 5 Manual page 107

Function
Power trigger
Recorder routing VI
Recorder routing V
PQ 10/12cyc
PQ trend
PQ flicker
Measuring inputs,1-phase voltage
Measuring inputs, 3-phase voltage
Measuring inputs, 1-phase current
Measuring inputs, 3-phase current
Binary input
Binary output
Communication channel
Process monitor
Function key
GOOSE input
LED, multicolor
Measuring transducers
Measuring transducers, fast
CFC standard
CFC arithmetic
CFC logic
CFC timer
CFC switching sequences
NOTE
i
i
A maximum of 40 sampled-value channels (SAV) are supported in the 7KE85 fault recorder, depending on
the significant feature selected. If you configure more than 40 channels, the message The number of
configured sampled-value channels (SAV) exceeds the maximum allowed appears in DIGSI 5.
If more than 40 sampled-value channels (SAV) are physically present in the device (for example, 6x IO202),
the device enters Fallback mode even if only 40 or fewer channels are configured.
A description of the function-point principle is provided in chapter
Functional Scope.
The following tables show the default settings of the signals in the application templates for the fast-scan and
slow-scan recorders:
Table 4-3
Signal
UserSPS
>Manual start
Recording started
Record made
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Significant Feature
1
2
2
2
2
2
2
2
2
2
1
1
9
9
1
1
1
5
5
1
1
1
1
1
Default Settings of the User-Defined Signals in the Fast-Scan Recorder
Routed in the Tab
Binary input 1
Function key 1
LED 1
LED 2
4.2 Application Template and Functional Scope for the Fault Recorder
2 5
4 6
4 6
4 6
4 6
4 6
4 6
4 6
4 6
4 6
1 1
1 1
9 9
9 9
1 1
1 1
1 1
5 5
3 5
1 1
1 1
1 1
1 1
1 1
2.2 Adjustment of Application Templates/
Routed as
H (active without voltage)
P (trigger pulse)
U (unbuffered)
U (unbuffered)
Applications
7 9
8 10
8 10
8 10
8 10
8 10
8 10
8 10
8 10
8 10
1 1
1 1
9 9
9 9
1 1
1 1
1 1
5 5
5 5
1 1
1 1
1 1
1 1
1 1
107