Information List; Communication With 20-Ma Unit; Integration Of A Serial 20-Ma Unit - Siemens SIPROTEC 5 Manual

Addr.
_:13111:108
_:13111:107
_:13111:104
_:13111:105
_:13111:109
_:13111:106
_:13111:110
6.5.4.4

Information List

No.
General
_:2311:53
_:2311:56
Channel 1
_:13111:53
_:13111:71
_:13111:301
_:13111:302
6.5.5

Communication with 20-mA Unit

6.5.5.1

Integration of a Serial 20-mA Unit

Connection of the Communication Lines
Figure 6-40 shows how to connect the 20-mA unit to the SIPROTEC 5 device. Note that Pin 1 of the RJ45 plug
is connected to RTD-B and Pin 2 is connected to RTD-A.
[dwve20au-150213-01.tif, 1, en_US]
Figure 6-40
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Parameter
Channel 1:Resolution
Channel 1:Range active
Channel 1:Conversion
factor
Channel 1:Upper limit
Channel 1:Upper limit -
Sensor
Channel 1:Lower limit
Channel 1:Lower limit -
Sensor
Information
General:Health
General:Failure
Channel 1:Health
Channel 1:Failure
Channel 1:20-mA output scale
Channel 1:20-mA output raw
Connection of the 20-mA Unit to the SIPROTEC 5 Device
C Setting Options
•
1
•
0.1
•
0.01
•
0.001
•
0
•
1
1 to 1000000
0.00 mA to 20.00 mA
-1000000 to 1000000
0.00 mA to 20.00 mA
-1000000 to 1000000
Function-Group Types
6.5 Function-Group Type Analog Units
Default Setting
0.1
false
100
20.00 mA
100
4.00 mA
100
Data Class Type
(Type)
ENS O
SPS O
ENS O
SPS O
MV O
MV O
183