Siemens SIPROTEC 5 Manual page 43

[sc7kevor-220213-01.tif, 1, en_US]
Figure 3-1
Menu Path
Main menu → Indications →
Main Menu → Test & Diagnosis → Indications →
To reach the desired log from the main menu, use the navigation keys of the on-site operation panel.
²
Navigate inside the log using the navigation keys (top/bottom). You will find the most current indication
²
at the top of the list. The selected indication is shown with a dark background.
Which indications can be shown in the selected log depends on the assignments in the DIGSI 5 informa-
²
tion routing matrix or is pre-defined.
You will find information about this in the chapter
Every indication contains date, time and its state as additional information.
²
In some logs you are given the option of deleting the entire indication list by softkey in the footer of the
²
display.
To know more about this, read chapter
NOTE
i
i
No password entry is necessary to read indications from the device.
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
On-site Display of an Indication List (Example: Operational Indications)
Log
Operational indications
Settings change
User indications 1
User indications 2
Security indications
Device diagnosis
Communication indications
3.1.5.1 General
3.1.10 Saving and Deleting the Log
System Functions
3.1 Indications
.
.
43