Continuous Recorder; Trend Recorder; Measured Values And Binary Inputs - Siemens SIPROTEC 5 Manual

Power trigger
Voltage trigger
Current trigger

Continuous Recorder

11.4.3
Setting Values
Continuous Recorder
Memory capacity
Averaging time
Number of Recorder Instances
Continuous recorder
Signals to be Recorded
Refer to Number of Routable Measured Values (MV) and Binary Tracks (SPS), Page 439
11.4.4

Trend Recorder

Setting Values
Trend Recorder
Memory capacity
Number of Recorder Instances
Trend recorder
Signals to be Recorded
Refer to Number of Routable Measured Values (MV) and Binary Tracks (SPS), Page 439

Measured Values and Binary Inputs

11.4.5
Binary Inputs
Sampling
Resolution
Refresh rate
Number of Routable Measured Values (MV) and Binary Tracks (SPS)
Recorder
Fast-scan recorder
Slow-scan recorder
Continuous recorder
Trend recorder
26 Toggle rates applied permanently and greater than 10 Hz are not recommended.
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Setting Range
0.200 GB to 14.800 GB
1 s to 900 s
0 to 5
Setting Range
0.200 GB to 14.800 GB
0 to 2
4 kHz 26
1 ms
Event-driven
Measured Values (MV)
75
75
75
100
Technical Data
11.4 Recorder Functions
Increment
Increments of 1
Increment
Increments of 1
Binary Tracks (SPS)
200
100
–
200
439