Structure Of The Power-System Data - Siemens SIPROTEC 5 Manual

5.2

Structure of the Power-System Data

The Power-system data contain the block General and the Measuring points of the device. The following
figure shows the structure of the Power-system data:
[dwpow7ke-130213-01.tif, 2, en_US]
Figure 5-1
In order to adjust its functions to the application, the device requires some data about the power system. The
necessary settings can be found in the Power-system data under General as well as in the Measuring points.
Type and scope of the required measuring points depend on the application. Possible measuring points are:
•
Voltage 3-phase (measuring point V 3-ph)
•
Current 3-phase (measuring point I 3-ph)
The measuring points have interfaces to the following function groups:
•
VI 3-phase
•
V 3-phase
•
Phasor Measurement Unit
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Structure of the Power-System Data
Power-System Data
5.2 Structure of the Power-System Data
111