Siemens Sinamics S120 Manual page 703

Table 12- 4 Comparison of the connection versions
Var. Module width
[mm]
1 50 ... 100
2 50 ... 100
3 50 ... 100
4 150
5 150 ... 300
6 200 ... 300
Connections as cross-sectional drawings (view from below)
Note
The different connection versions of the DC-link adapter are shown in the following cross-
sectional drawings. Special features are highlighted in bold in the table above.
Variant 1: Module width 50-100 mm, connected to the drive line-up from the right, standard DC-link
busbar
①
②
③
④
⑤
Figure 12-5
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6
Installat Current-
ion carrying
capacity of
the
DC-link
busbar [A]
Right ≤ 100
Right ≤ 150
Left ≤ 100
Right ≤ 150
Left ≤ 150
Right ≤ 200
DC-link adapter 6SL3162-2BM01-0AA0 (4 hole)
Standard DC-link busbar (4 mm)
Connecting the DC-link adapter to the module using 2 M4x20 screws
Connecting the DC-link busbar to the module using 2 M4x16 screws
DC-link bridge
Variant 1 (representation from below)
12.5 Arrangement of components and equipment
DC-link DC-link
adapter busbar
6SL3162-...
2BM01-0AA0 Standard
2BM10-0AA0 Reinforced 2 screws
2BM01-0AA0 Standard
2BM01-0AA0 Standard
2BM01-0AA0 Standard
2BM01-0AA0 Standard
Cabinet design and EMC Booksize
Fastening of the Screws
DC-link adapter
to two DC-link
busbars
2 screws M4x20
M4x20
2 screws M4x16
2 screws M4x20
2 screws M4x20
4 screws M4x20
Washers
No
No
No
No
Yes
No
703