Drive-Cliq Coupling; Description; Interface Description; Overview - Siemens Sinamics S120 Manual

Accessories

11.7 DRIVE-CLiQ coupling

11.7 DRIVE-CLiQ coupling
11.7.1

Description

The DRIVE-CLiQ coupling is used to connect 2 DRIVE-CLiQ cables in accordance with
degree of protection IP67 acc. to EN 60529.
In addition to the data lines, the power supply contacts of DRIVE-CLiQ are also routed via
the coupling.
You can find information on the permissible cable length in Chapter DRIVE-CLiQ signal
cables (Page 731)
11.7.2

Interface description

11.7.2.1

Overview

①
②
Figure 11-40 Interface overview, DRIVE-CLiQ coupling
686
Rating plate
Protective cap, Yamaichi, order number: Y-ConAS-24-S
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6