Setpoint Of The Mop; Co: Act. Output Freq. Of The Mop - Siemens MICROMASTER 440 Parameter Manual

Issue 01/06
P1040[3]

Setpoint of the MOP

CStat: CUT
P-Group: SETPOINT
Determines setpoint for motor potentiometer control (P1000 = 1).
Index:
P1040[0] : 1st. Drive data set (DDS)
P1040[1] : 2nd. Drive data set (DDS)
P1040[2] : 3rd. Drive data set (DDS)
Note:
- If motor potentiometer setpoint is selected either as main setpoint or additional setpoint, the reverse
direction will be inhibited by default of P1032 (inhibit reverse direction of MOP).
- To re-enable reverse direction, set P1032 = 0.
r1050

CO: Act. Output freq. of the MOP

P-Group: SETPOINT
Displays output frequency of motor potentiometer setpoint ([Hz]).
DIN
P0840
BOP
P1035
USS
BOP link
USS
P1036
COM link
CB
COM link
Possible parameter settings for the selection of MOP:
P0719 = 0, P0700 = 2, P1000 = 1
DIN
P0719 = 0, P0700 = 1, P1000 = 1
BOP
P0719 = 0, P0700 = 4, P1000 = 1
USS on
BOP link
P0719 = 0, P0700 = 5, P1000 = 1
USS on
COM link
P0719 = 0, P0700 = 6, P1000 = 1
CB
MICROMASTER 440 Parameter List
6SE6400-5BB00-0BP0
Datatype: Float
Active: Immediately
Datatype: Float
1
0
1
0
1
0
f
P1082
P1080
P1120
-P1080
-P1082
Selection
or
P0719 = 1, P0700 = 2
or
P0719 = 1, P0700 = 1
or
P0719 = 11
or
P0719 = 1, P0700 = 4
or
P0719 = 41
or
P0719 = 1, P0700 = 5
or
P0719 = 51
or
P0719 = 1, P0700 = 6
or
P0719 = 61
Min:
Unit: Hz Def:
QuickComm.: No Max:
Min:
Unit: Hz Def:
Max:
P1121
r1050
MOP up
MOP down
P0702 = 13 P0703 = 14
(DIN2) (DIN3)
UP button DOWN button
USS control word
USS control word
r2032 Bit13 r2032 Bit14
USS control word USS control word
r2036 Bit13 r2036 Bit14
CB control word CB control word
r2090 Bit13 r2090 Bit14
Parameter Description
Level
-650.00
2
5.00
650.00
Level
-
3
-
-
t
t
t
t
f
act
121