Status Word: Flying Start V/F; Status Word: Flying Start Slvc - Siemens MICROMASTER 440 Parameter Manual

Parameter Description
r1204

Status word: Flying start V/f

P-Group: FUNC
Bit parameter for checking and monitoring states during search, if V/f control mode is selected (see P1300).
Bitfields:
Bit00 Current applied
Bit01 Current could not be applied
Bit02 Voltage reduced
Bit03 Slope-filter started
Bit04 Current less threshold
Bit05 Current-minimum
Bit07 Speed could not be found
r1205

Status word: Flying start SLVC

P-Group: FUNC
Bit parameter for checking status of flying start performed with n-adaption of observer. Parameter is only
valid, if sensorless vector control (SLVC) is selected (see P1300).
Bitfields:
Bit00 Transformation active
Bit01 Initialize n-adaption
Bit02 Current applying
Bit03 N-controller closed
Bit04 Isd-controller open
Bit05 RFG hold
Bit06 N-adaption set to zero
Bit07 Reserved
Bit08 Reserved
Bit09 Reserved
Bit10 Direction Positive
Bit11 Search is started
Bit12 Current is applied
Bit13 Search is aborted
Bit14 Deviation is zero
Bit15 N-controller is active
138
Datatype: U16 Unit: -
Datatype: U16 Unit: -
Issue 01/06
Min: -
Def: -
Max: -
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
Min: -
Def: -
Max: -
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
0 NO 1 YES
MICROMASTER 440 Parameter List
6SE6400-5BB00-0BP0
Level
4
Level
3