Communication - ABB PSTX30 Installation And Commissioning Manual

6.1.3 Navigation screen
With the keypad, settings can be set individualy or
as a selection of predefined parameters for different
applications. The default parameter set is stored in the
unit for a possible reset to default values. When the
fieldbus communication is selected, parameters can also
be modified from this interface.
Press "Menu" to go to the menu and then use
to select parameter and
selected parameter is then highlighted black. Press the
"Select" to make your selection.
See Figure 47.
Edit parameter values
6.1.3.1
The numerical setting
Use the numerical setting when a numerical value is to
be set in the softstarter. Use
keys to select number, the selected number is highlighted
black. Then Press
6
selected number. Press
See Figure 48.
On/off switch
Select 1 or 0 (on or off) with the on/off switch. Use
and on the Navigation keys. Press
change the value of the selected switch. Press
to save. See Figure 49.
Selection list
Use the Navigation keys to navigate up and down in the
lists. The selected option is highlighted black. Press
"Save" to save.
See Figure 50.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
and to select menu. The
and on the Navigation
or to change the value of the
"Save" to save.
or
47
Local
Menu
and
Exit
Figure 46: Navigation screen
48
Local
Motor rated current Ie
0.0
Cancel
Figure 48: Numeral setting
49
to
"Save"
Local
Shunt fault event mask
1
0
0
0
0
Cancel
Figure 49: Switch setting
50
Local
Current limit type
Off
Normal
Dual
Ramp
Cancel
Figure 50: Selection list
PSTX30
Backup handling
System info
Settings
Select
12:00
PSTX30
30.0
A
0.0
12:00 Save
PSTX30
Event group 0
Event group 1
Event group 2
Event group 3
Event group 4
12:00 Save
PSTX30
12:00 Save