ABB PSTX30 Installation And Commissioning Manual page 62

Date and time
6.4.6.2
Path in menu:
Menu Settings
u u
For navigation see Figure 73.
Date and Time settings includes all date and time
configurations for the softstarter.
To change the settings in the Date & Time menu,
press "Edit" to enter the setting. Press "Save" to save
the set value. See Figure 74.
Table 8
Date & Time settings
Option
Date
Time
Show date as
6
Show time as
Show clock
Real time clock
The Real time clock is the local time in the softstarter. The
clock stays running 2 hours after control supply power
has been turned off. Set date and time again if a longer
power outage would occur.
When the configuration of the time setting is completed,
it is possible to return to the Home view, top level, by
pressing " Back" 3 times.
Display settings
6.4.6.3
Path in menu:
Menu Settings
u u
For navigation, see Figure 75.
The Display settings includes all display configurations of
the softstarter. To change the Display settings, Press
"Edit" to enter the setting level. Press
the set value.
Table 9
Display settings
Option
Contrast
Brightness
Power save
White on black
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Date and time
Function
Set date: Day, month and year.
Set time: Hour, minutes and
seconds.
The date can be displayed in three
different ways, depending on the
selected type. The following will
be displayed at top level:
CE day . month . year
US month/day/Year
SO year–month–day
Set the time to be displayed in
12-hour or 24-hour
Show clock On / Off
Display settings
"Save" to save
Function
Set the contrast intensity
0 ... 100%
Set the brightness intensity
0 ... 100%
This option turns off the display
backlight after selected time.
You can set the Power save to
start within 30 minutes, 1, 2, or 5
hours or Never
White on black display On / Off
Settings
MENU
Language
Parameters
Assistants
Date and time
Motor jog
Event log
Display settings
Backup handling
System info
Settings
Reset from defaults
Figure 73: Date & time.
74
Local PSTX
Date & Time
Date
Time
Show date as
Show time as
Show clock
Back 12:00
Figure 74: Language menu.
Settings
MENU
Language
Parameters
Assistants
Date & time
Motor jog
Event log
Display settings
Backup handling
System info
Settings
Reset from defaults
Figure 75: Display settings.
Date & time
Date: 27.06.2014
Time: 12:00:00
Show date as: day.month.year
Shoe time as: 24-hour
[ ] Show clock
27.06.2014
12:00:00
day.month.year
24-hour
Edit
Display settings
Contrasts 80 %
Brightness 80 %
Powersave
[ ] White on black