ABB PSTX30 Installation And Commissioning Manual page 83

The inputs shall be used with 24 V and shall be of current
sinking type, 10 mA. The digital input is isolated and can
withstand up to 100V in potential difference between
the softstarter functional earth
interconnected system. The inputs is be possible to use
both with internal 24 V or external 24 V supply.
The digital input values for respective input voltage:
"0" = 0 – 5 V
"1" = 15 – 33 V
Maximum voltage input is 33 V and minimum is -0.5 V.
Outside these voltage ranges the digital value is undefined
and can be either "0" or "1".
Internal digital Inputs (Internal IO) is configured with
the following parameters:
Parameter
10.01 In0 function
10.02 In1 function
10.03 In2 function
External digital Inputs (extension IO)
with the following parameters:
Parameter Description
11.01 1DI0 function Function of programmable digital input.
11.02 1DI1 function
11.03 1DI2 function
11.04 1DI3 function
11.05 1DI4 function
11.06 2DI5 function
11.07 2DI6 function
11.08 2DI7 function
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
and the earth of the
Description
Function of programmable digital
input.
is configured
Same as 1DI0
Same as 1DI0
Same as 1DI0
Same as 1DI0
Same as 1DI0
Same as 1DI0
Same as 1DI0
Setting range
None, Reset, Enable, Slow speed
forward, Slow speed backward,
Motor heating, Stand still brake,
Start reverse, User defined
protection, Emergency mode,
Fieldbus disable control, Start 1,
Start 2, Start 3
Same as In0
Same as In0
Setting range
None, Reset, Enable, Slow speed
forward, Slow speed backward, Motor
heating, Stand still brake, Start reverse,
User defined protection, Emergency
mode, Fieldbus disable control, Start 1,
Start 2, Start 3
Same as 1DI0
Same as 1DI0
Same as 1DI0
Same as 1DI0
Same as 1DI0
Same as 1DI0
Same as 1DI0
Default value
Reset
None
None
Default value
Reset
None
None
Run
Top of ramp
Event group 0
0-10 mA
Motor Current (A)
7