ABB PSTX30 Installation And Commissioning Manual page 86

Internal Analog output is configured with the following
parameters:
Parameter
10.07 AO reference
10.08 AO type
10.09 AO max value
10.10 AO min value
External Analog output (Extension IO) is configured
with the following parameters:
Description
11.13 1AO0 reference
7
11.14 1AO0 type
11.15 1AO0 max value
11.16 1AO0 min value
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Description
Sets the Analog output reference.
Sets the Analog output type.
Sets the max analog output value.
Sets the min analog output value.
Description
Sets the Analog output reference.
Sets the Analog output type.
Sets the max Analog output value.
Sets the min Analog output value.
Setting range Default value
0-10mA, 0-20mA, 4-20mA
4-20mA, 0-10V
Motor current, Mains Motor current [A]
voltage, Active power,
Active power, Reactive
power, Apparent power,
Active energy,Reactive
energy, cos fi, Motor
temperature, Thyristor
temperature, Motor
voltage, Mains
frequency, PT100
temperature, PTC
resistance
0,0 ... 1000000 500
0,0 ... 1000000 0
Setting range Default value
0-10mA, 0-20mA, 4-20mA
4-20mA, 0-10V
Motor current, Mains Motor current [A]
voltage, Active power,
Active power, Reactive
power, Apparent power,
Active energy,Reactive
energy, cos fi, Motor
temperature, Thyristor
temperature, Motor
voltage, Mains
frequency, PT100
temperature, PTC
resistance
0,0 ... 1000000 500
0,0 ... 1000000 0