Exiting Service Modes; Backing Up Service Mode; Initial Screen - Canon imageRUNNER 5065 series Service Manual

Chapter 17
1) Press the asterisk key ( ) on the operation panel.
2) Press 2 and 8 simultaneously on the numeric keypad.
3) Press the asterisk key ( )on the operation panel.
The initial screen (see below) now appears.
Copier service modes
ADF service modes
Sorter/finisher service modes
Option board service modes

17.1.3 Exiting service modes

iR5065 / iR 5055 / iR5075 / / /
When the reset key is pressed once, the display returns to the service mode initial screen.
When the reset key is pressed twice, the service modes are exited, and the display returns to the user screen (standard screen).
When using the ADJUST, FUNCTION or OPTION service mode, be sure to turn the main power switch ON/OFF after exiting the mode.

17.1.4 Backing Up Service Mode

iR5065 / iR 5055 / iR5075 / / /
All machines are inspected at time of shipment, and adjustment values are recorded on their service labels. If you have replaced the reader controller PCB or the
DC controller PCB, or if you have initialized the RAM, ADJUST and OPTION will be reset to their default settings. If you have made adjustments and changed
any of the settings, be sure to update the settings recorded on the service label. If specific items are missing on the label, use its blank space.
[1] Service label (for main controller PCB/DC controller PCB)
[2] Service label (for reader controller PCB)

17.1.5 Initial screen

iR5065 / iR 5055 / iR5075 / / /
17-2
Displayed only when the ADF is attached.
Displayed only when the finisher is attached.
(There are no modes for the sorter,
so isn't displayed even
SORTER
when the sorter is attached.)
Displayed only when an option board is
attached.
COPIER
FEEDER
SORTER
BOARD
F-17-3
[1] [2]
F-17-4
0015-5499
0015-5501
0015-5502