Power Off Of The Host Machine; Installation Procedure - Canon imageRUNNER 5065 series Service Manual

Table of Contents

2.11.3 Power off of the host machine

iR5065 / iR 5055 / iR5075 / / /

When turn off the main power, implement the following steps to protect the hard disk of this product.

1) Push the control panel power switch for 3 sec or more.

2) Operate the touch panel following the instruction on the screen of shutdown sequence in order to be ready to turn

off the main power switch.

3) Turn off the main power switch.

4) Pull out the power cable (for the outlet).

iR5065 / iR 5055 / iR5075 / / /

1) Open the cable clamp [1], and disconnect the reader communications cable [2].

2) Detach the upper rear cover [1].

- 6 screws [2]

3) Detach the main controller box cover [1].

- 4 screws [2]

How to turn off the main power

Table of Contents