Variable Resistors (Vr), Light-Emitting Diodes (Led), And Check Pins By Pcb - Canon imageRUNNER 5065 series Service Manual

J713
J137
J901
J902
J903
J107
J631
J632

15.3.9 Variable Resistors (VR), Light-Emitting Diodes (LED), and Check Pins by PCB

15.3.9.1 Variable Resistors (VR), Light-Emitting Diodes, and Check Pins by PCB
iR5065 / iR 5055 / iR5075 / / /
Of the variable resistors (VR), light-emitting diodes (LED), and check pins found in the machine, those that are needed when servicing the machine in the field are
discussed.
- Some LEDs carry current and emit light when they are off; this is a normal condition, and must be kept in mind.
- Take note of the following:
...VR that may be used in the field.
...VR that must not be used in the field.
15.3.9.2 DC Controller PCB
iR5065 / iR 5055 / iR5075 / / /
J726
J2109
J719
J325
J602
J1404
J601
J251
J124
J108
J1543
J1414
J322
J222
J6310
J6320
J138
100V 3031
J725
120V 3032
J715
230V 3033
J130
J131
J108
J111
J125
J5770
J1401
J5500
J702
J718
J550
J577
J1415
J321
J4004
J4005
F-15-20
J1041
J1030
J1031
J1040
J101
J4009
J4006
J4003
Chapter 15
0015-5395
0015-5396
15-23