Fixing Shutter Motor; Before Removing The Shutter Motor; Removing The Shutter Motor; Fixing Inlet Guide Solenoid - Canon imageRUNNER 5065 series Service Manual

9.5.19 Fixing shutter motor

9.5.19.1 Before Removing the Shutter Motor

iR5065 / iR 5055 / iR5075 / / /
1) Detach the fixing front cover. (page 10-14)Reference[Removing the
Fixing Front Cover]
2) Remove the fixing drive assembly. (page 10-20)Reference[Removing
the Fixing Drive Assembly]

9.5.19.2 Removing the Shutter Motor

iR5065 / iR 5055 / iR5075 / / /
1) Free the harness from the harness guide [1] and remove the shutter motor
[4].
- 1 connector [2]
- 2 screws [3]
[3]

9.5.20 Fixing Inlet Guide Solenoid

9.5.20.1 Before Removing the Fixing Inlet Guide Solenoid
(SL1)
iR5065 / iR 5055 / iR5075 / / /
1) Detach the fixing front cover. (page 10-14)Reference[Removing the
Fixing Front Cover]
2) Detach the fixing/feeding
13)Reference[Removing the Fixing/Feeding Unit Front Cover]
3) Detach the fixing/feeding unit middle cover. (page
13)Reference[Removing the Fixing/Feeding Unit Middle Cover]

9.5.20.2 Removing the Fixing Inlet Guide Solenoid (SL1)

iR5065 / iR 5055 / iR5075 / / /
1) Free the harness from the wire saddle [3] and remove the harness guide.
- 1 connector [1]
- 1 screw [2]
2) Remove the fixing/feeding unit releasing lever support plate [2].
- 2 screws [1]
[1]
[4] [2]
F-9-118
unit front cover. (page
[1] [3]
[2]
F-9-119
[1]
0015-8281
0015-5072
Mark the screw positions before removing the screws in the next step.
3) Remove the fixing inlet guide solenoid [2].
- 2 screws [1]
0015-8282
10-
10-

9.5.20.3 Adjusting the Fixing Inlet Guide Solenoid (SL1)

0015-5073
iR5065 / iR 5055 / iR5075 / / /
Adjust the position of the fixing inlet guide solenoid with the screw [1] so
that the guide positions as shown in the figure below when the solenoid is
turned on.
Pressure roller

9.5.21 Delivery Flapper Solenoid

9.5.21.1 Before Removing the Delivery Flapper Solenoid
(SL5)
iR5065 / iR 5055 / iR5075 / / /
1) Detach the
12)Reference[Removing the Duplexing Feed Front Cover]
[2]
F-9-120
[1] [2]
F-9-121
Fixing roller
Inlet guide
F-9-122
duplexing feed front cover.
Chapter 9
0015-9983
[1]
Solenoid
0015-7200
(page 10-
9-35