The machine is in an AC off state when its main power switch remains off, with all its power supplies and heater control mechanisms also remaining off.
4. Power Supply Arrangement
The following shows how the various loads of the machine are supplied with power while the machine is in individual states:
Operation set
Main power switch
Input
Front door switch
Output
*Output from the main controller PCB.
10.4.5.2 SNMP setup
iR5065 / iR 5055 / iR5075 / / /
When the machine is used as a Windows printer, enabling 'Use SNMP' causes the operating system to collect machine status information at specific intervals, pre-
venting the machine from starting a sleep state.
To avoid the situation, disable the setting (Windows' printer properties).
-Disabling 'Use SNMP'
1) Select 'Configure Port' on the Ports screen (printer properties).
2) Remove the check mark from 'SNMP Status Enabled'.