Points To Note When Mounting The Upper Separation Claw - Canon imageRUNNER 5065 series Service Manual

2) Turn the fixing/feeding unit releasing lever [1] counterclockwise to
unlock. Hold the lever [1] to slide out the fixing/feeding unit [2] forward.
(Note that the duplexing feed unit will also be slid out.)
[1]
3) Open the delivery unit cover [1].
4) While lifting the spring [1], remove the upper separation claw [2].
[1]
F-9-128
[2]
F-9-129
[1]
F-9-130
[1]
9.5.23.2 Points to Note When Mounting the Upper
Separation Claw
iR5065 / iR 5055 / iR5075 / / /
Pay attention to the relative positions between the upper separation claw and
spring when mounting the upper separation claw.
9.5.24 Lower Separation Claw
9.5.24.1 Before Removing the Lower Separation Claw
(Unit)
iR5065 / iR 5055 / iR5075 / / /
1) Detach the duplexing
12)Reference[Removing the Duplexing Feed Front Cover]
2) Slide out the fixing/feeding unit. (page 9-18)Reference[Removing the
Fixing/Feeding unit]
3) Detach the fixing front cover. (page 10-14)Reference[Removing the
Fixing Front Cover]
4) Detach the fixing/feeding
13)Reference[Removing the Fixing/Feeding Unit Front Cover]
5) Detach the fixing/feeding unit middle cover. (page
13)Reference[Removing the Fixing/Feeding Unit Middle Cover]
6) Detach the fixing upper cover. (page 10-13)Reference[Removing the
Chapter 9
[2]
F-9-131
F-9-132
feed front cover.
(page
unit front cover.
(page
0015-5080
0015-7204
10-
10-
10-
9-37