Removing The Lower Separation Claw (Unit) - Canon imageRUNNER 5065 series Service Manual

Chapter 9
Fixing Upper Cover]
7) Remove the fixing drive assembly. (page 10-20)Reference[Removing
the Fixing Drive Assembly]
8) Remove the fixing upper unit. (page 9-19)Reference[Removing the
Fixing Upper Unit]

9.5.24.2 Removing the Lower Separation Claw (Unit)

iR5065 / iR 5055 / iR5075 / / /
1) Free the harness from the 4 clamps and disconnect the 1 connector [1].
2) Remove the lower separation claw unit [2].
- 2 screws [1]
[1]
When removing the lower separation claw unit, follow the steps above.
Follow the steps below when removing the lower separation claw.
3) Remove the 2 springs [1] from the lower separation claw.
[1]
4) Remove the lower separation claw support plate [2] and remove the lower
separation claw [3].
- 3 screws [1]
9-38
[1]
F-9-133
[2]
F-9-134
F-9-135
0015-5082
[2]
[3]
[1]
F-9-136