Registration Clutch; Before Removing The Registration Clutch; Removing The Registration Clutch; Registration Brake Clutch - Canon imageRUNNER 5065 series Service Manual

Chapter 8
[3]
7) Slide the horizontal registration unit [2].
- 2 screws [1]
[1]
8) Remove the horizontal registration motor [2].
- 2 screws [1]
[1] [2]
9) Remove the horizontal registration sensor [2].
- 1 connector [1]
[1]

8.10.23 Registration Clutch

8.10.23.1 Before Removing the Registration Clutch

iR5065 / iR 5055 / iR5075 / / /
1) Detach the duplexing
12)Reference[Removing the Duplexing Feed Front Cover]
2) Remove the duplex feeding unit.(page 8-44)Reference[Removing the
Duplex Feeding Unit]
8-38
[2] [3] [1]
F-8-117
[2]
[1]
F-8-118
[1]
F-8-119
[2]
F-8-120
feed front cover.(page

8.10.23.2 Removing the Registration Clutch

iR5065 / iR 5055 / iR5075 / / /
1) Remove the registration clutch [3].
- 1 connector [1]
- 1 E-ring [2]

8.10.24 Registration Brake Clutch

8.10.24.1 Before Removing the Registration Brake

iR5065 / iR 5055 / iR5075 / / /
1) Detach the
12)Reference[Removing the Duplexing Feed Front Cover]
2) Remove the fixing/feeding unit. (page 9-18)Reference[Removing the
Fixing/Feeding unit]
3) Remove the transfer/separation charging assembly. (page
29)Reference[Removing Transfer/Separation Charging Assembly]
4) Remove the registration clutch. (page 8-38)Reference[Removing the
Registration Clutch]

8.10.24.2 Removing the Registration Brake

iR5065 / iR 5055 / iR5075 / / /
1) Remove the registration brake [1].
- 1 screw [2]

8.10.25 Feeding Roller

8.10.25.1 Before Removing the Feeding Roller

iR5065 / iR 5055 / iR5075 / / /
1) Remove the
30)Reference[Removing the Right Deck Pickup Assembly]
2) Remove the cassette pickup assembly. (page 8-26)Reference[Removing
the Cassette 3/4 Pickup Assembly]
3) Remove the
30)Reference[Removing the Left Deck Pickup Assembly]

8.10.25.2 Removing the Feeding Roller

iR5065 / iR 5055 / iR5075 / / /
0015-5195
1) Detach the feeding roller cover [1].
- 1 screw [2]
(Skip this step in for the left deck pickup assembly)
10-
2) Remove the resin E-ring [3] in the front side of the feeding roller.
3) Remove the feeding roller [5] together with the timing belt [4].
[3] [2] [1]
F-8-121
duplexing feed front cover.(page
[1] [2]
F-8-122
right deck pickup assembly.
left deck pickup assembly.
0015-5196
0016-0334
10-
7-
0016-0335
0015-5197
(page 8-
(page 8-
0015-5199