Table of Contents
Advertisement
Installation of this unit
11
Mount the magazine drawer into the Base
Module.
≥ Insert the part with the bend on the side of the
magazine drawer into the guide rails on the side of the
chassis of the Base Module, and push it all the way
inside until it locks. The unit does not work unless the
magazine drawer is pushed to the end.
≥ Make sure that the direction of the magazine drawer is
inserted correctly.
≥ Depending on the system configuration or installation
location, this step must be performed with both hands
at an elevated height. Ensure that the work area is
safe and be careful not to stumble over objects or fall
from the area.
Guide rails on the chassis side
Part with the bend on the side of the
Installation
magazine drawer
≥ Do not carry a magazine drawer with its mounting
surface down. Failure to observe this instruction may
cause the magazine to drop.
≥ Do not touch any mechanical portion other than portions
indicated in the instructions of the procedure. Failure to
observe this instruction may cause the content of the
magazine to fall out.
≥ Do not remove the magazine by main force. Failure to
observe this instruction may damage the magazine and
magazine drawer.
≥ Do not put your hand in the unit from the opening of the
magazine drawer.
≥ Do not place anything other than magazines and
magazine drawers in the unit.
≥ Be careful not to catch your fingers in the magazine
drawer.
≥ Do not slam the magazine drawer shut.
33
Advertisement
Table of Contents
