Table of Contents
Advertisement
Installation of this unit
3. Install DA control software
1
Set up the Web interface and an SNMP
environment.
≥ To install additional modules, mount the OS installation
media (CentOS 7/Red Hat Enterprise Linux 7), and
install Apache and Ruby for the web interface and the
SNMP service.
#mkdir˽-p˽/media/cdrom
#mount˽/dev/sr0˽/media/cdrom
*The devise name (/dev/sr0) is different according
to the server.
#cd˽/opt/DA3Controller_XXXX
(XXXX represents the version number.)
#˽./setup.sh
≥ The installation is complete when the message below appears.
If the domain status which appears after the installation is indicated as "running", the software has started up correctly.
make environment completed.
● damain.service - damain
Loaded: loaded (/usr/lib/systemd/system/damain.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2016-09-30 06:45:39 JST; 12h ago
Process: 2813 ExecStart=/usr/sbin/damain (code=exited, status=0/SUCCESS)
Main PID: 2814 (damain)
CGroup: /system.slice/damain.service
mq2814 /usr/sbin/damain
Sep 30 06:45:39 localhost.localdomain systemd[1]: Started damain.
Installing DATA ARCHIVER Control Software
54
2
Set the configuration information of DATA
ARCHIVER and install DA control software.
≥ If the message below appears while the setup.sh shell
script is being executed, enter the numbers of modules
to be connected (excluding the Bottom Module) and
drive bays (Base Module and Writer Units combined).
After that, DA control software is automatically
installed.
install libOptArc.
input number of module : 2
input number of drive bay: 2
Advertisement
Table of Contents
