Connecting To A Server (Exclusive Use Connection Cable) [Base Module]; Connecting An External Power Supply (Base Module/Bottom Module/Writer Unit) - Panasonic LB-DH7 Series Installation Manual

Installation of this unit
Connecting to a server (exclusive use connection cable)
[Base Module]
Connect the Base Module (LB-DH70A) and server.
≥ Use the supplied exclusive use connection cable B.
Connecting an external power supply
(Base Module/Bottom Module/Writer Unit)
This DC cable must be connected to an external power
supply by an installer who is provided with information on
the proper work procedure.
When connecting the external power supply, disconnect
the AC cable of the external power supply in advance.
Connect the DC cable to an external power supply
properly.
≥ Improper connection may result in short-circuit or
overheating, causing a fire or electric shock.
For information on external power supplies that have been
validated to work with the unit, contact the vendor.
1
Connect the DC power supply connectors for
+24 V to the power supply connectors of the
Bottom Module.
DC power connector
for +24 V
White triangle pointing down
Connection
Base Module
50
2
Connect the connectors of the DC cable for
+24 V/+12 V to the power supply connectors of
the Base Module and all the Writer Units.
DC power connector for
+24 V/+12 V
White triangle pointing to the right
≥ Connect all the modules (Base Module/Bottom
Module/Writer Unit).
≥ Connect all the modules to the same external power
supply.