Overview Of Configuration; Description Of Operating Modes - Siemens 6DR50 Series Operating Instructions Manual

Operating
6.2 Operating modes
6.2.3

Overview of configuration

The following picture illustrates the handling of operating modes such as "Configuration" and
"Initialization mode":
Figure 6-4
6.2.4

Description of operating modes

P manual mode
Note
Delivery state
The "P manual mode" is preset for the positioner in the delivery state.
The display of the positioner shows the current potentiometer position in the upper line.
"NOINI" blinks in the second line of the display.
Move to the actuator with the
Switch to "Configuration" mode to adapt the actuator to the positioner.
Alarms or position feedbacks can be triggered after initializing the positioner completely.
108
Overview of the "Configuration" operating mode
or buttons.
Operating Instructions, 09/2014, A5E00074631-12
SIPART PS2 with and without HART