Digital Input And Output (Di/Do) Pinouts Xfc Di/Do; Figure 6-2: Xrc Ai Terminals And Input Mode Selector Jumpers - ABB XRC G5 User Manual

Figure 6-2: XRC AI terminals and input mode selector jumpers

Table 6-5: XRC AI Pinouts
Input
AI-1
AI-2
AI-3
AI-4
AI-5
The XFC G5 has 2 onboard digital outputs and 2 onboard digital inputs.
terminals on the XFC G5
inputs (STD) or pulse inputs from Coriolis (IEC). Remember to set the switch to the correct position
based on the type of pulse input signal expected. Use S3 for DI/PI 1 or S4 for DI/PI 2.
Listed below are the DIs and DOs for the XFC
Figure 6-3: XFC G5 DI/PI/DO terminals and input mode switches
Table 6-6: XFC G5 DI/PI/DO pinouts
I/O
DI2/PI2
DI1/PI1
5 2 | XSE RI ES G5 | 2 10 6 02 6MNAA
Pin Description
1 (+) Input signal
2 (COM) Input ground
3 (+) Input signal
4 (COM) Input ground
5 (+) Input signal
6 (COM) Input ground
7 (+) Input signal
8 (COM) Input ground
9 (+) Input signal
10 (COM) Input ground
and the input mode switches. The input mode switches support standard pulse
Pin J6 Description
1 (+) Input signal
2 (-) Input ground
3 (+) Input signal
4 (-) Input ground
G5 .
Figure 6-3 shows the Digital I/O